GE DMS Go Operator's Manual page 67

2.3.2j Obtaining Information on the Program (CONFIG-ABOUT)
Data on the DMS Go serial number and codes may be needed for your service provider to assist with any updates or corrections. It is
available through the ABOUT function.
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
) to select ABOUT (for general DMS Go information), and then toggle it (
2. Use the joystick (
program displays the required data (see Figure 15 below).
3. After reviewing the information, press the joystick or any function key to return to the main screen.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
Figure 15: DMS Go Information Screen
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to enter the function. The
Chapter 2. Instrument Setup
45
1-847-577-3980
Info@BergEng.com