Panasonic IMAGECHECKER PV230 Manual page 34

SD Memory Card: Reading/saving Dictionary Data
Dictionary data can be saved in and read from a SD memory card.
Up to 100 sets of dictionary data can be saved in a SD memory card. Five dictionaries that can be saved in the
PV230 are treated as 1 set. (However, the max. number of dictionary data can be saved varies according to
dictionary data size and SD memory card capacity.)
The file name and folder of a dictionary data stored is as follows.
• Folder: ¥Panasonic-EW SUNXVision¥PV230¥OCRData
• File: OCRnn.D23 ( nn = 00 to 99)
Dictionary data is not saved in a SD memory card even when "SD Card" has been selected for the destination
to save the setting data in "Save Setting Data" menu. Note that dictionary data should be saved by the following
procedure separately.
1.
Insert a SD memory card.
2.
Select "SAVE/READ" -> "SD Dictionary" from the
menu bar.
The list of dictionary data stored in the SD memory
card is displayed.
3.
Select "Save" to save the dictionary data, and
select "Read" to read the data from the menu
displayed by selecting a number.
In the case of reading, the dictionary data in the
PV230 is discarded and the dictionary data in the SD
memory card is read. If the dictionary data in the
PV230 is needed, select "No" when the message
"Are you sure to discard the current data?" appears,
and save the data in the PV230 to the SD memory
card. Then, read the data.
4.
When the confirmation message appears, select
"YES".
Reading or saving is executed.
After the saving has completed successfully when
saving the data, a message appears. Press the
ENTER key to close.
Copying and Deleting Dictionary
Dictionary data stored in the SD memory card can be copied or deleted with the keypad.
Delete
Point to the target number and press the FUNC key and select "Delete" from the displayed pop-up menu. When
the dialog message for confirmation is displayed, select "YES" to continue.
32