Accessories; Components - Panasonic Aquarea B1 Planning And Installation Manual

General
2 General
About this manual
This Manual describes the planning, design, installation and commissioning of Panasonic
Aquarea air-to-water heat pumps. The key information is to be found in the following three main
chapters.
Chapter 4 - Product Description - contains information covering the following aspects:
● Air-to-water heat pumps method of function
● Model types, functions and technical data relating to the Aquarea heat pump
systems
● Accessories
Chapter 5 - Planning - contains information covering the following aspects:
● Selection and design of the heat pump for specific use
● Selection of the installation site
● Planning and preparing for installation
Chapter 6 - Installation - contains information covering the following aspects:
● Installation of the cooling, hydraulic and electrical components
● Commissioning
You will also find in Chapter 7 - Servicing - a description of the key servicing jobs and in the Ap-
pendix an overview of the error codes, operating instructions for the models of the H Generation
and various types of document templates (e.g. protocols for commissioning and familiarisation).
In addition to the information contained in this Manual, attention must also be paid to the infor-
mation in the installation and operating instructions for the respective device.
Products covered
The current Aquarea heat pump systems are covered in this Manual: Compact systems, split
systems and systems with combined hydro-module. A detailed overview of the models covered
can be found at 1 Model range, p.
Intended use
Aquarea air-to-water heat pumps from Panasonic are intended for use in heating rooms and
preparing hot water and represent complete, high-quality heating systems. If required, they can
be combined with hot water tanks, solar thermal or photovoltaic systems and/or further electric-,
oil- or gas-powered heat sources.
The intended use of the heat pumps requires adherence to the information and instructions
contained in this Manual, especially the safety notices.
Any other use is considered improper and can lead to significant damage.
Panasonic assumes no liability for any damage resulting from improper use.
Target groups
This Manual is aimed at specialist planning and installation operations.
Installation and commissioning of the heat pumps may only be carried out by qualified
technicians.
10
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
8.
Only persons authorised by the manufacturer may make any changes, conversions and repairs.
Any changes or conversions made by customers themselves will basically exclude any liability
being incurred by the manufacturer for any damage resulting from this in exactly the same way
as with improper use.
Operation of the heat pumps can, in contrast, also be undertaken by private persons.
Information for using this Manual
Various notices, symbols and text representations used in this Manual are briefly explained
below.
Information related to safety
Information related to safety warns the user about dangers and provides instructions for the
safe and proper use of the product. The following Warning Notices and symbols are used in this
Manual:
WARNING
This signal word warns of a hazard which can lead to death or severe injury.
► Follow the Warning Notices given in order to prevent this.
CAUTION
This signal word warns of a hazard which may result in slight or moderate injury.
► Follow the Warning Notices given in order to prevent this.
CAUTION
This signal word warns of a situation which can result in material damage occurring.
► Follow the Warning Notices given in order to prevent this.
Additional warning symbols
Warning of electric shock
Further information
!
IMPORTANT
Important information which must be observed in all cases in order to ensure that the devices
function in the intended manner.
i
Note
Notice for further useful information.
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
General
11