Process Technology; Anti-Crease; Drying Levels; Additional Cooling - Miele PDR 908 HP Operating And Installation Instructions

Process technology

Anti-crease

At the end of the program, the drum
will continue to rotate at intervals if the
laundry is not removed immediately.
Changing this setting leads to increased
energy consumption.
The setting  can be switched off or a
time between 1 and 12 hours can be
selected.
Factory default: Off

Drying levels

Changing this setting leads to increased
energy consumption.
You can alter the drying levels for the
Cottons, Minimum iron, and Automatic
plus programs.
It can be set to one of 7 different levels.
Factory default: Normal
The Machine iron drying level in the
Cottons program can be individually
adapted.
You can change the residual moisture in
this program to one of 11 levels from
16% (more dry) to 26% (more moist).
Factory default: 20%
Supervisor level

Additional cooling

Before the end of the program, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the program is extended if
necessary.
Changing this setting leads to increased
energy consumption.
– Factory default: Off
– On

Cooling down temperature

The laundry will be cooled down
automatically before the end of the
program. The automatic cooling-down
phase which takes place before the
end of a program can be set at a
cooler level for all programs. This
means that the cooling phase is
extended.
Changing this setting leads to increased
energy consumption.
The setting can be changed from
104-131°F (40°C–55°C).
Factory default: 131°F (55°C)
97