The Delay start must be activated in
the Supervisor level so that the timer
can be selected.
Before the program starts, the Timer
can be used to select a program start
time or program end time.
Setting the timer
Touch the
Timer
Select the
Finish at
at
option.
Set the hours and the minutes and
confirm your entry with the
control.
Changing the timer
The selected delay-start period can be
changed before the program starts.
Touch the , , or sensor
control.
If required, change the specified time
and confirm with the
control.
Deleting the timer
The selected delay-start period can be
canceled before the program starts.
Touch the , , or sensor
control.
The selected delay-start period will
appear in the display.
Touch the
Delete
Confirm with the
The selected delay-start period is
deleted.
sensor control.
,
, or
Start in
Start
OK
sensor
OK
sensor
sensor control.
OK
sensor control.
Starting the timer
Touch the Start/Stop sensor control.
The door will lock and the time until the
program starts will appear in the
display.
After the program has started, the
selected delay-start period can only
be changed by interrupting the
program.
The program can be started
immediately at any time.
Touch the
Start immediately
control.
Timer
sensor
33