Table of Contents
Advertisement
.
3-6-37
PB Head Sensitivity Detection (25M Mode)
Specification
Sensitivity 150+/-15 (mV/um)
Mode
Playback
Test Point
(1) ATF:TP732 (2) HSW:TP723(PB HSW) (not TP722(RP HSW) (3) GND:TG510
Adjustment
SERVO Adjustment Menu:"A09 RP GAIN P"
Tape
VFM3581KM or VFM3581KL
Before this adjustment PB Head Sensitivity Adjustment (25M Mode) must be completed.
1. Open the Service Menu and select "A11 PB GAIN DP".
2. Playback a LISTA alignment tape (VFM3581KM).
3. Select LISTA Main Menu " (1) Sensitivity Measurement" Press enter when " 1.2% Speed..." is appeared to start
the Sensitivity measurement.
4. Confirm that the specification is satisfied when << Sensitivity Measurement Finish>> and " Sensitivity =
sensitivity value" are appeared.
Adjustment Value
Advertisement
Chapters
Table of Contents
