Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
LAY OUT AND INSPECT PANELS
Panel sizes vary. Assemble the wine vault
panels in the positions shown. Corner
panels are interchangeable.
INSTALL THE BASE CHANNELS
Thoroughly clean the floor surface where the vault
is to be installed.
Step 1:
Locate the three ceiling panels. Lay the
panels on the floor, top surface up. Align
the outside edges of the panels and pull
the panels tightly together.
Mark a line on the floor that is 1/2"
outside the ceiling panels. The line will
indicate the location of the outside
edges of the base channels of the vault.
Carefully remove the ceiling panels and
set aside for later installation.
8
"
4 6
"
1 / 2
3 4
1
/
"
2
Holes for
Ceiling Lights
Hole for Power Cord
FRONT
"
2 3
Advertisement
Table of Contents
