Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
INSTALLATION CHECKLIST
Wine Vault Installation Checklist
Check to be sure that all panels are aligned with each other. There should be no gaps
between the panels, along the base channels, or at the top.
Open and close the door. Check to be sure that the door sweep does not bind and that
there is nothing to prevent the door from closing securely, such as customer-installed
interior flooring. The door must close securely.
Check all locking connectors for tightness, one at a time. Press a plug button cover
into each opening and tap with a rubber mallet as you proceed.
Connect and Test Power
Plug the wine vault plug into the matching receptacle. Twist the plug slightly clockwise
to lock it into the receptacle.
Test the inside outlets to make sure power is available.
Check to be sure that the interior lights illuminate when the exterior rocker switch
is pressed.
DISCONNECT THE POWER CORD.
20
Advertisement
Table of Contents
