Page 4
Power Distribution Unit (Only for Regions other than the EMEIA, Central American, and Caribbean Regions) ............................83 Power Synchronized Unit ......................86 7. Release Information Firmware Release Information...................... 87 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 5
Front View of a Controller Enclosure (with a Front Cover).................69 Figure 42 Front View of a Controller Enclosure (without a Front Cover)..............69 Figure 43 Rear View of a Controller Enclosure (ETERNUS DX500 S3) ................70 Figure 44 Rear View of a Controller Enclosure (ETERNUS DX600 S3) ................71 Figure 45 Front View of a 2.5"...
Page 6
Power Distribution Unit (AC200-240V, 2U, 16 Outlets)................85 Figure 56 Power Distribution Unit (AC16A/200-240V, 2U, 16 Outlets) ..............85 Figure 57 Power Distribution Unit (AC24A/200-240V, 2U, 16 Outlets) ..............86 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 7
Power Distribution Unit (AC16A/200-240V, 2U, 16 Outlets) and Provided AC Cable Specifications ...85 Table 24 Power Distribution Unit (AC24A/200-240V, 2U, 16 Outlets) and Provided AC Cable Specifications ...86 Table 25 Release Information List ..........................87 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 8
Preface Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX500 S3/DX600 S3 (hereinafter referred to as ETERNUS DX). The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY, and other servers) or non-Fujitsu servers.
Page 9
Indicates information that you need to observe when using the ETERNUS storage system. Make sure to read the information. Indicates information and suggestions that supplement the descriptions included in this manual. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 10
- Be careful that no liquid seeps into the ETERNUS storage system when using cleaners, etc. - Do not use alcohol or other solvents to clean the ETERNUS storage system. Warning layout ribbon FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The ETERNUS DX supports SAS disks, cost-efficient and high-capacity Nearline SAS disks, and very high perform- ance Solid State Drives (SSDs). Up to 528 drives can be installed in the ETERNUS DX500 S3 and up to 1,056 drives can be installed in the ETER- NUS DX600 S3.
Page 12
SAN host interfaces can be selected from FC 16Gbit/s, FC 8Gbit/s, iSCSI 10Gbit/s, iSCSI 1Gbit/s, and FCoE 10Gbit/s. Up to 16 ports can be installed in a single ETERNUS DX500 S3 and up to 32 ports can be installed in a single ETERNUS DX600 S3.
Page 13
This allows a reduction in the number of drives and drive capacity than before, and efficiently saves the increasing amount of data. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
Page 14
Extreme Cache (SSD cache built in a controller) significantly increases the read cache capacity and ensures low latency for access to shared data between servers. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 15
Regarding connections with a SAN host, a cluster configuration between two ETERNUS DX/AF storage systems is possible. Even if some trouble occurs and I/O becomes inaccessible, operations can continue by automatically switching the access destination to the standby ETERNUS DX/AF. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 16
■ Environmental Friendliness The ETERNUS DX is a green-certified product that satisfies Fujitsu's original strict environmental standards as part of its global efforts to reduce the environmental burden. The environmental burden is reduced by using an energy saving design that reduces power consumption.
*1: Use of RAID0 is not recommended because it is not redundant. For RAID0 configurations, data may be lost due to the failure of a single drive. *2: Fujitsu original RAID level that provides the high speed rebuild function, and striping with double distrib- uted parity.
Red Hat Enterprise Linux 5 Red Hat Enterprise Linux 6 Red Hat Enterprise Linux 7.0 Red Hat Enterprise Linux 7.1 Red Hat Enterprise Linux 7.2 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 27
Solaris 11.3 The confirmed OSs with FTP / FXP • Regardless of the OS type, access is possible as long as an FTP client is used. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
● ETERNUS CLI When using ETERNUS CLI for operation management, prepare the telnet application, the SSH application, or the terminal emulator in the administration terminal. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The ETERNUS DX double-checks data by using the data block guard function and by using the supported T10-DIF to improve reliability. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Sign of Hot spare failure RAID5 (Redundant) Disconnects the maintenance target drive and switches it to the hot spare. RAID5 (Redundant) Disconnected FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Replaces the failed drive with the new drive. Copyback After replacing has been completed, copies the data from the hot spare to the new drive. RAID5 (Redundant) Hot spare RAID5 (Redundant) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The target drives of the Protection (Shield) function are all the drives that are registered in RAID groups or regis- tered as hot spares. Note that the Protection (Shield) function is not available for unused drives. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
Free area in the physical disk Vol.1 Vol.2 Vol.3 is shared with each volume. Free area Free area Used area Vol.1 to Vol.3 Used area FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Infrequently ETERNUS DX accessed data Low speed tier (Tier 3: Nearline SAS disks) Moving to a Nearline SAS disk → Initial disk cost is reduced FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Pool (SSDs) faster by reading data from the SSDs instead of reading data from the disks. Extreme Cache Pool (SSDs) Disks FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Striping for Multiple RAID Groups Server I/O access performance can be improved by distributing the allocation of a volume across multiple RAID groups with Wide Striping. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
By setting which function can be used by each user, unnecessary access is reduced. ETERNUS DX AccountAdmin SecurityAdmin Maintainer User Account Storage System Security Management Management Management FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
AES (*1) or Fujitsu Original Encryption can be selected as the encryption method. The Fujitsu Original Encryp- tion method uses a Fujitsu original algorithm that has been specifically created for ETERNUS DX storage sys- tems.
Note that ETERNUS SF KM is required when linking with the key management server. Figure 16 Key Server ETERNUS DX Key server RAID group RAID group Authentication key Authentication key ETERNUS DX RAID group RAID group FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The sanitization function of the SSDs can be used to delete user data for cases such as disposal of the SSDs. The Maintenance Operation policy is required to sanitize the SSDs. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
SAS disks SAS disks SAS disks Backup Nearline SAS disks Nearline SAS disks Nearline SAS disks Disks stopped Disks spinning Disks stopped Control linked to operation FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Figure 19 Power Consumption Visualization Temperature Power consumption ETERNUS DX storage systems ETERNUS SF Storage Cruiser Collects power consumption and temperature data for each storage system. Server FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
■ ETERNUS SF ETERNUS SF can manage a Fujitsu storage products centered storage environment. An easy-to-use interface ena- bles complicated storage environment design and setting operations, which allows easy installation of a storage system without needing to have high level skills.
Figure 20 Event Notification Mail SNMP Syslog server server manager E-mail SNMP Trap Syslog Host sense Remote support Server (host) center REMCS/AIS Connect ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The time is regularly corrected every three hours once the NTP is set. Figure 21 Device Time Synchronization NTP server Date and Time yyyy xx:xx:xx Time Zone + 09.00 Daylight Saving Time ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
For more details about power synchronized units, refer to "Configuration Guide (Power Synchronized Unit)". Figure 22 Power Synchronized Unit Diagram Server Server for server for server Power synchronized unit ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The MAC address for the ETERNUS DX can be checked on ETERNUS CLI. Figure 23 Power Supply Control Using Wake On LAN Administration terminal Wake On LAN utility Packet transmission ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Analysis Deduplication Duplicate data blocks are removed Compression: Data blocks are compressed A B C D E F Target volume for deduplication/compression ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Data 1 is Data 2 is written written Compression: Data blocks are compressed A B C D A B E F Target volume for compression ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
By using the host affinity function, a host interface port can be shared by multiple servers with different OSs in a system or by multiple servers in a cluster system. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
In addition, an upper bandwidth limit can be set for each copy path. Even if a specific path fails, a steady load can be maintained without centralizing the load to other paths. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
Figure 29 Host Response (Connection Operation Mode) Server A Server C Server B ETERNUS DX Host Response settings for Server A for Server B for Server C FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Since Storage Migration is controlled by ETERNUS DX controllers, no additional software is required. Online Storage Migration and offline Storage Migration are supported. Figure 31 Storage Migration The source storage system ETERNUS DX Storage Migration FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
The ETERNUS information is added on the vSphere Client management screen ETERNUS DX • Full Copy (XCOPY) Copying in a storage system Linkage software ETERNUS DX software (setup tool) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 60
VMware Web Client. Because storage side information is more visualized, integrated management of the infrastructure under a virtual environment can be realized and usability can be improved. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
LVM has a snapshot function. This function obtains any logical volume data as a snapshot and saves the snap- shot as a different logical volume. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
ETERNUS DX This chapter explains the available functions when a NAS connection is used. Unified kit/Unified License cannot be installed if the Deduplication/Compression function is used. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Users obtain authentication to log on to the network and privileges to access system resources. Group accounts can also be created and effective management for user access privileges is available. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
The Quota function allows the scale of the organization and the use of the system to be taken into consideration to realize flexible operations. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Active Directory authentication or local user authentication. Figure 39 Home Directories CIFS access share1 share2 \\IP_address_of_the_NIC-CA\User1 \\IP_address_of_the_NIC-CA\homes homes/ homes/ User1 User2 User (User1) NAS user volume ETERNUS DX FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Snap Data Pool (SDP) Expansion area Directory Supply File File Acquire Snapshot destination RAID group Perform differential copy for each volume when snapshot is acquired. : Snapshot FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
FST (LAN) port RMT (LAN) port MNT (LAN) port 10. Drive interface (OUT) port 11. PWC port 12. Power supply unit (CPSU#0) 13. Power supply unit (CPSU#1) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Each controller has one BUD. If the BUD fails, the failed BUD can be replaced while the system is running. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
A host interface (CA) is an adapter that has interface ports to connect a controller to a server. Up to two host interfaces for the ETERNUS DX500 S3 and up to four host interfaces for the ETERNUS DX600 S3 can be installed for each controller.
A controller enclosure has two power supply units. Each power supply unit contains fans. If one of the power supply units fails, the failed unit can be replaced while the system is running. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
Figure 46 Rear View of a 2.5" Type Drive Enclosure I/O module (IOM#0) I/O module (IOM#1) Drive interface (IN) port Drive interface (OUT) port Power supply unit (PSU#0) Power supply unit (PSU#1) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Figure 48 Rear View of a 3.5" Type Drive Enclosure I/O module (IOM#0) I/O module (IOM#1) Drive interface (IN) port Drive interface (OUT) port Power supply unit (PSU#0) Power supply unit (PSU#1) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Drive Enclosure ● Top View Figure 50 Top View of a High-Density Drive Enclosure with the Cover Opened Rear Front 3.5" type high-density drive enclosure FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Power supply unit (PSU#0) Power supply unit (PSU#1) Power supply unit (PSU#2) Power supply unit (PSU#3) Fan expander module (FEM#0) 10. Fan expander module (FEM#1) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
A high-density drive enclosure has four power supply units and up to two failed units can be replaced while the system is running. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
(12Gbit/s) *1: The following disks are Advanced Format (512e) disks. 6TB Nearline SAS disks • 8TB Nearline SAS disks • 10TB Nearline SAS disks • FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Table 19 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) and Provided AC Cable Specifications Item Specifications Power Voltage AC 200 – 240V Phase Single Frequency 50Hz/60Hz Input cable Connection type IEC60320 C13 n NEMA L6-15P Length Quantity FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Table 21 Power Distribution Unit (AC200-240V, 2U, 12 Outlets) and Provided AC Cable Specifications Item Specifications Power Voltage AC 200 – 240V Phase Single Frequency 50Hz/60Hz Input cable Connection type Straight-through n NEMA L6-20P Length Quantity FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Table 23 Power Distribution Unit (AC16A/200-240V, 2U, 16 Outlets) and Provided AC Cable Specifications Item Specifications Power Voltage AC 200 – 240V Phase Single Frequency 50Hz/60Hz Input cable Connection type Straight-through n NEMA L6-20P Length Quantity FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
ETERNUS DX. For more details about power synchronized units, refer to "Configuration Guide (Power Synchronized Unit)". FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED...
Self encrypting SSDs Nearline SAS self-encrypting disks [SAN environment] VMware VVOL V10L33 June 2015 Features added • [NAS environment] Improved performance Expanded the number of snapshot generations FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 88
Expanded the number of characters that can be specified for the volume name (previously 16 characters, now 32 characters) V10L84 November 2018 Features added • V10L85 [SAN environment] Added the Smart Setup Wizard FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 89
Detail of functional modification V10L86 April 2019 Features added • V10L87 Support for disabling the user information initialization function using the buttons on the operation panel FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Overview Copyright 2019 FUJITSU LIMITED P3AM-7702-29ENZ0...
Page 90
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...