Show Udp - GE PACSystems RX3i Command Line Interface Manual

2

show udp

Global Command
This command displays User Datagram Protocol (UDP) status and counters.
show udp Command Format
show udp
Example
device-name>show udp
01-JAN-2000
<<< UDP Status >>>
Udp:
11711 packets received
11 packets to unknown port received
0 packet receive errors
6 packets sent
<<< UDP Counters >>>
InDatagm=00000010H
OtDatagm=00000033H
device-name>
UDP Counter Definitions
Counter
Number of incoming datagrams validated and accepted by the UDP communications
InDatagm
stack.
Number of incoming datagrams discarded by the UDP communications stack
NoPorts
because the destination UDP ports were not initialized for reception.
Number of incoming datagrams discarded by the UDP communications stack
InErrors
because they are invalid datagrams, e.g., invalid checksums, etc.
Number of outgoing UDP datagrams sent by the UDP communications stack to
OtDatagm
remote hosts.
PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011
2-74
Screen Display
01:30:27.0
NoPorts =0000000bH InErrors=00000000H
Description
show udp
GFK-2572