Monitor-Level Commands - GE PACSystems RX3i Command Line Interface Manual

Chapter

Monitor-Level Commands

2
This chapter describes commands that are available with Monitor-level access to the Command
Line Interface. The same commands are also available at the Modify level. Additional
commands, restricted to Modify-level access, are defined in chapter 3.
Monitor Access Level Commands
 Alias
 Cls
 Help
 History
 Log
 Login
 Node
 Shconfig
 Show arp
 Show config
 Show debug exception
Show debug fatalinfo

 Show icmp
 Show ip
GFK-2572
 Show log
 Show mac
 Show mem
 Show network
 Show node
 Show port
 Show profinet
 Show rdnmedia
 Show session timeout
 Show sm
 Show tcp
Show telnetd

 Show time
 Show udp
 Terminate
2-1