2-2
Important Directions for Use
Areas of Use and Application
2.2
Inappropriate Use
VSB 40.1-type devices of Bosch Rexroth are industrial PCs, that
represent in combination with a display VDP 16, VDP 40 or VDP 60 a PC-
based operator terminal, that can – depending on the application or
configuration – also perform control functionalities.
Note:
The VSB 40.1 may only be used with the accessories and
parts specified in this document. If a component has not been
specifically named, then it may not be either mounted or
connected. The same applies to cables and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
Typical applications of the VSB 40.1 are:
•
Handling and assembly systems,
•
Packaging and foodstuff machines,
•
Printing and paper processing machines,
•
Machine tools,
•
Wood working machines.
The VSB 40.1 may only be operated under the assembly, installation and
ambient conditions as described here (temperature, system of protection,
humidity, EMC requirements, etc.) and in the position specified.
Using the VSB 40.1 outside of the above-referenced areas of application
or under operating conditions other than described in the document and
the technical data specified is defined as "inappropriate use".
The VSP 40.1 may not be used, if
•
they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extremely high maximum temperatures or if
•
Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safety
Guidelines!
VSB 40.1
DOK-SUPPL*-VSB*40.1***-PR01-EN-P