Cleaning And Care; Inspection; Maintenance; Replacement Of Worn Parts - Bosch Rexroth LU 2 Assembly Instructions Manual

11.1 Cleaning and care

Failure of the bearings
Applying grease-dissolving substances to the bearing points, e.g. when cleaning,
leads to the failure of the bearings. There is a risk of damage to property, and
the service life may be reduced.
Keep degreasers or aggressive cleaning away from the bearings!
Clean the product only with a damp cloth.
Failure of the toothed belt
Applying grease-dissolving substances to the toothed belt, e.g. when cleaning,
leads to the failure of the toothed belt. There is a risk of damage to property.
Keep degreasers or aggressive cleaning away from the toothed belt.
Clean the product only with a damp cloth.

11.2 Inspection

Periodically check the system status for possible errors by visual inspection of
the LED indicators and the display (see page 25).

11.3 Maintenance

The automatic lubrication unit LU 2 is maintenance free.

11.4 Replacement of worn parts

Required tools
• Hex wrench (open-ended spanner) SW13, SW17, SW19.
• Hex socket head cap screw SW4.
Maintenance and repair
NOTICE
3 842 358 814/2017-01, MIT: LU 2, Bosch Rexroth AG
45/54