Make The Electrical Connection To The Product - Bosch Rexroth LU 2 Assembly Instructions Manual

38/54 Installation
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2017-01

8.6 Make the electrical connection to the product

High electrical voltage!
Risk of serious injury or death from electric shock.
Make sure the relevant system component is not under pressure or voltage
before electrically connecting the product.
Secure the system against being switched on unintentionally.
Damage to the product caused by faulty electrical connection
The product can be damaged.
Electrical connection requires basic mechanical and electrical knowledge.
The product may only be operated by qualifi ed personnel (see page 8).
The voltage supply must comply with the connection data of the lubrication unit
(see "Technical data" on page 52).
• Choose control and sensor elements in accordance with EN ISO 13849.
• Observe VDE specifi cation VDE 0100 in Germany or the appropriate specifi cations
in the country of use.
2
1
358 814-10
Fig. 18: Plug assignment (view of the drive socket)
Table 10: Plug assignment
Pin Cable color Signal
1 brown Voltage supply + V DC
2 white Signal output
3 blue Voltage supply GND
4 black Signal output Err
Signal states for the outputs OK and Err see Table 8 on page 25.
WARNING
NOTICE
4
3