VAU 01.1
VAU 01.1U
Fig. 12-1: Front view VAU 01.1U, VAU 01.1S and VAU 01.1Z
12.2 Software
As the communication between UPS and connected panel PC or control cabinet
PC occurs via a USB or RS232 interface, the UPS software "UPS-NT-Control-
Software" has to be started in the connected device. The installation is descri-
bed in the relevant documentation of the control cabinet PC or of the panel PC,
see "Further documents" in
12.3 Operating and Display Components
In addition to the connection terminals, display and operating elements are ar-
ranged on the connector panel.
VAU 01.1U/VAU 01.1S
①
Rotary switch, S1
②
LED for status and error display
Fig. 12-2: Connector panel of the UPS
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
VAU 01.1S
chapter 1 "About this Documentation" on page
1
2
Bosch Rexroth AG
Device Description
VAU 01.1Z
VAU 01.1Z
1.
33/53