Bosch ACS 561 Repair Instructions page 65

ACS 561 Service Manual
PANEL MANIFOLD
ASSEMBLY
VACUUM PUMP
(SEE NOTE 3, 6, 7)
(SEE NOTE 4, 7)
BULKHEAD
BLOCK
(SEE NOTE 4, 7)
OIL INJECT
BOTTLE ASSY
NOTES:
1. Adjust the position of hoses A and B. Hoses must pass through
the center divider slot. Check all hoses for stress and verify scale operation.
3. Apply Loctite 222 or equivalent to threads except Rilsan hoses and connection to check valve.
4. Torque hose fittings to 8.5 Nm ±0.5 Nm.
5. No kinks shall exist along length of Rilsan hoses.
6. Hoses shall not be able to kink when control panel is in its normal as well as forward positions.
7. Lubricate all o-rings and check valve.
8. Hoses and lines with dimensions are made from Rilsan hoses.
Robert Bosch GmbH
1010mm ±3mm
(SEE NOTE 2, 5)
A
(SEE NOTE 1, 3, 6, 7)
(SEE NOTE 1, 3, 7)
560mm ±3mm
( SEE OTE 2, 5 N )
Figure 4-2. Plumbing Interconnection Diagram
Plumbing and Mechanical
OIL SEPARATOR /
(SEE NOTE 3, 6, 7)
(SEE NOTE 3, 6, 7)
OIL
FLUSH BLOCK
SEPARATOR
USE LOCTITE
(SEE NOTE 3)
(SEE NOTE 3, 6, 7)
570mm ±3mm
(SEE NOTE 2, 5)
(SEE NOTE 3, 7)
(SEE NOTE 3, 7)
OIL DRAIN
BOTTLE
ASSEMBLY
B
ISV TANK
ASSEMBLY
65
DRYER FILTER
ASSEMBLY
(SEE NOTE 3, 7)
(SEE NOTE 3, 7)
HPS
FILTER
DRYER
COMPRESSOR
SP00D00517 2018-07-11