Stats; Ver - GE MDS RCL220 Manual

RCL220_manual_v3-draft.doc
HIGH
NOW=<now > Write Only for all users, starting at Administrator.
SLEEP
SHUTDOWN
HANGTIME=<hangtime> Read/ Write for all users, starting at Administrator.
Minimum wake time in seconds before returning to low power mode.
Acceptable value range: 5 - 600
CMD=<cmd> If set to 0, the command executes normally. If <cmd> is set to 1, the
command reports all settings in a format that may be copied into a configuration
script.
3.2.19

STATS

Usage: STATS {ALL} {RADIO} {COM1} {COM2} {RESET}
Description: Radio statistics. If <device> (RADIO,COM1,COM2,ETH) is omitted, all
statistics are displayed
NOTE: CMD=1 command not supported.
Access Level: Administrator
Optional Arguments:
ALL Read Only for all users listed above. Get all statistics
RADIO Read Only for all users listed above. Get radio packet statistics (TBD)
COM1 Read Only for all users listed above. Get COM1 packet statistics
COM2 Read Only for all users listed above. Get COM2 packet statistics
RESET Write Only for all users, starting at Administrator. Reset packet statistics for
the indicated interface
3.2.20

VER

Usage: VER {BOOTREV=} {SWID1=} {SREV1=} {DSREV1=} {MSREV1=} {SWID2=}
{SREV2=} {DSREV2=} {MSREV2=} {IMAGE=<image>} {DSPSW=} {MCUSW=} {CONFIG=}
{EVENT=} {LOG=} {HREV=} {XHREV=} {CMD=<cmd>}
05-XXXXA01 Version 3 Draft
DTR Active HIGH
Sleep immediate
Shutdown immediate
Page 46 of 79 9/20/2016