Help; Log - GE MDS RCL220 Manual

RCL220_manual_v3-draft.doc
FIX=<fix> Read Only.
NO
YES
DIFF
SATS=<sats> Read Only. Number of tracked GPS satellites
Acceptable value range: 0 - ????
LAT=<X.XXXXX> Read Only.
Acceptable value range: X.XXXXX Degrees
LON=<X.XXXXX> Read Only.
Acceptable value range: X.XXXXX Degrees
CMD=<cmd> If set to 0, the command executes normally. If <cmd> is set to 1, the
command reports all settings in a format that may be copied into a configuration
script.

3.2.9 HELP

Usage: HELP
Description: List commands supported for the current user login level.
NOTE: CMD=1 command not supported.
Access Level: Logged Out User
Optional Arguments:
none
3.2.10

LOG

Usage: LOG {CLEAR} {SHOW} {TOTAL=} {CMD=<cmd>}
Description: Set / display the event log information. Displays the number of entries in
the event log. Optional arguments are used to clear or display the log.
NOTE: CMD=1 short form response command is supported.
Access Level: Administrator
Optional Arguments:
05-XXXXA01 Version 3 Draft
No
Yes
Differential
Page 38 of 79 9/20/2016