Table of Contents
Advertisement
Additional Features
Control Your BCC50 with Amazon Alexa
Bosch offers one Smart Home Skill for integrating your BCC50 with Amazon Alexa's voice controls. Using the Bosch
Connected Control Skill from the Skills section of the Amazon Alexa App.
You Can Control the BCC50 by Saying:
▶
Alexa, turn (Device Name) on.
▶
Alexa, turn (Device Name) off.
▶
Alexa, Increase (Device Name) by _ _ degrees.
▶
Alexa, Decrease (Device Name) by _ _ degrees.
▶
Alexa, Set (Device Name) to _ _ degrees.
▶
Alexa, what is the (Device Name) set to?
▶
Alexa, what is the temperature of the (Device Name)?
42
Device Name
The Device Name is the name assigned to your device in
the BCC50 app. You can check the device name by
opening the BCC50 app and reading the name displayed
on the main menu of selectable devices.
The Amazon Alexa commands for the
BCC50 are intended for use in Heating
Only and Cooling Only modes.
You must have a registered BCC50
account to set up and use your
thermostat with Amazon Alexa.
Connecting Your BCC50 to Amazon Alexa
1.
Download the BCC50 App, create an account, and register your app to the BCC50 thermostat.
2.
Download the Amazon Alexa app and set up your Alexa-enabled device.
3.
In the Amazon Alexa app, click on the Menu button in the top left corner.
Click on the Skills section and search for "Bosch Connected Control" in the search bar at the top of the page.
4.
5.
After you find and click on the Bosch Connected Control Skill, click on the blue Enable button.
6.
The setup process redirects you to a Bosch sign-in page where you will need to enter your BCC50 account
username and password.
7.
After you have received confirmation that your two accounts have been successfully linked, click Done in the top
left hand corner.
8.
Next click Discover Devices in the Amazon Alexa app or say "Alexa, discover new devices." Device Discovery could
take up to 45 seconds.
9.
When device discovery is complete, you should see a list of connected devices in the Smart Home menu of your
Amazon Alexa app.
The setup process is now complete and you can start to control your BCC50 with your Alexa enabled device. Try out
some of the commands above and enjoy!
43
Hide quick links:
Advertisement
Table of Contents
