Table 137 Interface Command; Interface - Nokia 7302 Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub services
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

Virtual Private LAN Service
(2 of 2)
5.16.2.14
Table 137
258
Item
Description
Parameters
table-size — The maximum number of MAC entries in the forwarding database.
Values: 1 — 131071

interface

interface command
Item
Description
Syntax
interface ip-int-name [create]
no interface
Context
configure>service>vpls
Description
This command creates an IP interface on top of a VPLS.
The IP interface is created within a VRF instance called vpls-management.
This allows to receive/send IP packets (for example, ANCP) over an MPLS pseudowire (that
is, spoke-spd or mesh-sdp).
Two types of IP interfaces can be created on top of a VPLS, they are distinguished based on
their name:
1) A normal IP interface: the name of this interface should not start with ANCP
2) An ANCP IP interface: the name of this interface must start with ANCP
An ANCP interface has the following syntax: ANCP_X_[Y_]....
The X value represents an integer VLAN value (0 ≤ X < 4096) and is mandatory.
The Y value represents a integer p-bit value (0 ≤ Y ≤ 7) and is optional. When this value is not
specified or when an invalid value is specified, then the default value of 6 is used.
When sending a packet over a normal IP interface, the packet which is sent over the
pseudowire is composed as follows:
sdp binding of type ether: the MPLS L2 payload is untagged
sdp binding of type vlan: the MPLS L2 payload is tagged with the VLAN value specified
as vlan-vc-tag
When sending a packet over an ANCP IP interface, the packet which is sent over the
pseudowire is composed as follows:
sdp binding of type ether: the MPLS L2 payload is VLAN-tagged with value X (of the
interface name) and p-bit Y
sdp binding of type vlan: the MPLS L2 payload is double-tagged with outer VLAN value
X, inner VLAN value vlan-vc-tag and outer p-bit Y
Restrictions
On a specific VPLS instance all interfaces have to be of the same type (that is, all ANCP
or all normal)
The value X of all the ANCP interfaces must be identical for all VPLS instances.
This kind of IP interface can only be created on top of a VPLS. Not on top of a v-VPLS.
An IP interface can only be created when the VPLS has igmp-snooping disabled.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents