FD 100/320Gbps NT and FX NT IHub Services Guide
4.6.5.16
Table 82
4.6.5.17
Table 83
Issue: 13
mip
mip command
Item
Description
Syntax
mip [mac mac-address]
mip default-mac
no mip
Context
configure>service>epipe>spoke-sdp>eth-cfm
Description
This command enables/disables Maintenance Intermediate Points (MIP)
Parameters
mac-address - The MAC address of the MIP in xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
Value: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx
default-mac - keyword. To indicate the use of default MAC address for the MIP.
vlan-dot-1q-etype
vlan-dot1q-etype command
Item
Description
Syntax
vlan-dot1q-etype etype]
no vlan-dot1q-etype
Context
configure>service>epipe>
Description
This command enables the configruatin of an alternate TPID value to be used at the service
level.
The no form of this command disables the configuration of an alternate TPID value.
Default
no vlan-dot1q-etype
Parameters
etype - specifies the etype value.
Values are:
•
hexadecimal: 0x0600 to 0xffff
•
decimal: 1536 to 65535
3HH-11985-AAAA-TQZZA
Virtual Leased Line Services
141