Re-Calibrating - Panasonic UB-T880 Manual

3. Calibrate the equipment by touching the center of the indicated points following the
instructions on the screen.
• Touch the screen board at a right angle with a finger not to detect other fingers. Do not do so, as this
may result in misalignment.
• After touching the indicated point correctly, the next point will display automatically.
4. Choose whether to save the calibration settings, and then click [OK].
When calibration has finished normally, a completion dialog box is displayed.
If the elite Panaboard and projector are fixed so that they will not move (If Wall mounted), select the
[Always use this calibration information.] button, and click [OK] to skip calibration the next time the elite
Panaboard driver is started.

Re-calibrating

Calibration will have to be redone in the following cases;
• The location of the projector changed.
• The location of the elite Panaboard changed.
• The image area or placement was changed due to changes in the zoom, focus, etc.
• The resolution of the projector or the computer changed.
The elite Panaboard Calibration utility can be run again at any time by clicking the calibration icon on the
Select Function Menu or by double-clicking the elite Panaboard Calibration icon, in the [Panasonic] – [elite
Panaboard UB-T8] – [elite Panaboard Calibration] in the Applications folder.
― 10 ―