Figure 3.
2.5
Verifying commissioning
It is recommended to monitor the hop for at least half an hour after all settings
have been made at both ends of the hop. Reset the statistics and the error counters
and let the hop operate for half an hour (or longer, if desired). After the time has
passed, check that the signal quality statistics and the error counters do not show
any undesired values (see Section 3.2.).
If the signal quality is OK (unavailability time = 0) and there are no unexpected
alarms, the commissioning of the hop is complete. If there occurs any
unavailability time during the monitoring, repeat the monitoring.
16 (42)
© Nokia Networks Oy
Outdoor Unit Settings
Commissioning and Maintenance
DN99611394
Issue 2-0 en