4.6
Finishing alignment
To finish the alignment:
1.
2.
3.
4.7
Attaching the radio section
To attach the radio section:
1.
2.
DN99592289
© Nokia Networks Oy
Issue 2-1 en
Tighten the locking screws with a torque wrench to 17 − 20Nm. Tighten
first the joint that is closer to the installation pole.
Check the alignment with the optical alignment tool.
Switch the optical alignment tool off. Unscrew the M6 screws with 5 mm
Allen key and remove the alignment tool.
Place the radio section on the alignment bracket.
Tighten the M6 screws with 5 mm Allen key.
Installing Nokia MetroHopper outdoor unit
19 (26)