Epson PP-100II Technical Reference Manual page 48

Key
Explanation
name
LABEL_TYP Specify the label
E type.
PRINT_MO Specify the print
DE mode.
IN_STACKE Specify the stacker
R to be used as the
input stacker.
MEASURE Specify whether to
measure the disc
recording side.
ARCHIVE_D Specify whether BD
ISC_ONLY writing is limited to
archive disc.
PLUG_IN_I Specifies the Plug-in
D to execute.
PLUG_IN_P Specifies the
ARAMETER parameter(s) to pass
to the Plug-in to be
executed.
*1 Specify this item when creating data discs.
*2 Specify only when creating video CDs.
*3 Specify only when burning discs using image files.
*4 In the case of ISO9660L2 format, the number of characters is limited to up to 32. Characters other than English one byte uppercase/
numerical characters and "_" cannot be used.
In the case of Joliet format, the number of characters is limited to up to 16. Characters other than English one byte uppercase/numerical
characters and "_" cannot be used.
In the case of UDF format, up to 62 characters can be used.
In the case of UDF Bridge format, the same limitation as ISO9660L2 is applied.
*5 Effective only when using BD with PP-7050BD.
*6 Disabled in PP-100N.
48
How to specify the setting
To specify "CD/DVD label", specify "1".
To specify "High-quality CD/DVD label",
specify "2".
To specify "EPSON -certified CD/DVD label",
specify "3".
If not specified, the label type in the
environment settings will be used.
To give priority to print quality, specify "1". To
give priority to print speed, specify "2" or "3".
(Specify "3" for the fastest speed.)
If not specified, the print mode in the
environment settings will be used.
"3" can only be specified if you have the PP-
100AP.
Invalid if "EPSON-certified CD/DVD label" is
specified for the label type (the print mode is
fixed at "Quality").
[When the output device is External Output
Mode]
Specify "1" to set stacker 1 as the input
stacker. Specify "2" to set stacker 2 as the
input stacker. Specify "AUTO" to used
both stacker 1 and stacker 2 as the input
stackers. If not specified, the default
source in the environment settings will
be used.
[When the output device is not External
Output Mode]
Invalid (will be disregarded if specified).
Specify "0" when not measuring.
Specify "1" when measuring the error rate.
When not specified, the disc recording side is
not measured.
(Specify "1" when the mode is set to Error Rate
Measurement Mode.)
Specify "YES" to limit.
Specify "NO" to make no limitation.
When not specified, BD writing is limited.
(Ignored when writing CD/DVD.)
For Read Back Plug-in, specifies
"EPSONTotalDiscReader".
"EPSONTotalDiscReader" can be executed
only in PP-100II / PP-50BD / PP-7050BD.
See "PLUG_IN_PARAMETER" on page 4-49.
Available
Maximum
characters
characters
(strings)
One character One bite Arbitrary
numbers
One character One bite Arbitrary
numbers
Four Any of "1", "2", Arbitrary
characters "AUTO"
One characters "0" or "1" Arbitrary
Three "YES" or "NO" Arbitrary
characters
40 One-byte Arbitrary
characters numerical
characters, "_"
1024 Characters that Arbitrary
characters contain no
control character
and can be
converted into
multi-byte
characters
Except PP- PP-100AP
Necessary/ 100AP, Key Key
Arbitrary available available
Yes/No Yes/No
● ●
● ●
●
--
*5
●
--
*5
●
--
● *6
--
● *6
--