Setting the Printer Driver
The printer driver allows you to configure various print settings. This section explains only about the required settings to be
used by the cooperative application.
Click [Start]-[All Programs]-[EPSON Total Disc Maker]-[EPSON Total Disc Maker] to start EPSON Total Disc Maker.
When EPSON Total Disc Maker is started, click [Publish] - [Tool] - [Print Setting].
Printer driver setting window is displayed. In the window, the following settings can be made. (The window shown is for the
PP-100.)
Setting Item
Mode
Color/Black
Setting
High Speed
Color Settings
Drying Time
Select color print or black (monochrome) print.
When this is selected, the bi-directional printing method is applied.
Color tone applied to the printing can be configured.
Specify the time for drying ink (from when label print is finished until when the
disc is moved toward the output stacker). Selectable up to 600 seconds in
increments of one second.
Chapter 3 Setting
Explanation
3
37