System Installation; When Installing This Product - Honeywell VisionPRO 8000 Product Data

SYSTEM INSTALLATION

When Installing this Product...

1. Read these instructions carefully. Failure to follow the
instructions can damage the product or cause a hazard-
ous condition.
2. Check the ratings given in the instructions to make sure
the product is suitable for your application.
3. Installer must be a trained, experienced service
technician.
4. After completing installation, use these instructions to
verify the product operation.
Finding Your Password (Date Code)
You will need the thermostat password to:
• Make changes to Installer Setup
• Perform an Installer Test
• Reset Thermostat to Factory Default Settings
The password (date code) is located on the back of the
thermostat (see Fig. 2)
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
1
Fig. 2. Finding thermostat password.
You can also find the password (date code) by pressing MENU,
selecting Dealer Information and then scrolling down to see the
Date Code.
5
®
VISIONPRO 8000 WITH WI-FI
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
1
M35344
Password
(Date Code)
33-00096—01
®