A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
( ⇒ P51 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
( ⇒ P52 [Audio Set Item] )
Video Set Item
HDMI/SDI Out
For setting the terminal to output the video.
Factory default is "Off".
→ SDI Out Resolution
For setting the resolution of the video output
from the [SDI OUT] terminal according to the
type of the monitor to be connected.
Memo :
When [Record Format]
●
"HD", a setting value can be selected from
[1080i, 1080p].
→ HDMI Out Res.
For setting the resolution of the video output
from the [HDMI] terminal.
If the video is not displayed correctly when
"Auto" is selected, select "480p/576p".
→ HDMI Color
For setting the color format of HDMI signals.
●
This item is selectable only when [HDMI/SDI
●
Out] is set to "HDMI".
→ HDMI Enhance
For setting the color range of HDMI signals.
●
When connecting to a PC monitor, set this to
"On".
This item is selectable only when [HDMI/SDI
●
Out] is set to "HDMI".
[System] is set to
51
→ HDMI Rec Trigger
For setting whether to superimpose trigger
signals in tandem with the [HDMI] terminal as
well as the [REC] button on this camera system.
When a compatible device is connected,
recording/stop control signals are output in
tandem with the operation of the [REC] button.
Memo :
If the connected unit is not compatible with
●
this function, set this parameter to "Off" to
prevent a malfunction.
→ HDMI TC Out
For setting whether to superimpose a time code
in video from the [HDMI] terminal.
Memo :
If the connected unit is not compatible with
●
this function, set this parameter to "Off" to
prevent a malfunction.
→ SDI Rec Trigger
For setting whether to superimpose trigger
signals in tandem with the [SDI OUT] or
[SDI(Moni) OUT] terminal as well as the [REC]
button on this camera system.
When a compatible device is connected,
recording/stop control signals are output in
tandem with the operation of the [REC] button.
SDI(Moni) Out Res.
For setting the resolution of the video output
from the [SDI (Moni) OUT] terminal according to
the type of the monitor to be connected.
SD Set Up
For selecting whether to add a setup signal to
the video signal output from the [AV OUT]
terminal.
Setup signals are added when "7.5%" is
selected.
(E model))
Memo :
Depending on the menu settings of the
●
camera system and the condition of the cable
connected to it, the setup signal setting may
this case.