Table of Contents
Advertisement
en
CHAPTER 9
9.3.2 Wiring
Figure 9.5 RJ11 connector of the power supply
9.3.3 Technical data of the power supply
Installation Instructions
32
Connecting the repeater
After mounting the repeater on the wall, it must be connected to the power supply cable
delivered with the repeater.
Proceed as follows (see figure 9.5):
1. Insert the plug into the line connector
2. Insert the adapter
into the wall socket.
The inset in fig. 9.5 shows the connections of the RJ11 connector of the power supply
cable.
1
3
Input voltage:
230 Vac/50 Hz, 60 mA, 12W
Output voltage:
2 x 9 Vdc, 300 mA
of the repeater
GND
+9V
DECT6000
.
2
Advertisement
Table of Contents
