Panasonic KX-NS1000 Programming Manual page 817

CLI Ring for DIL—Day, Lunch, Break, Night
Enables CLI distribution in each time mode.
Value Range
Disable, Enable
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.2 Direct In Line (DIL)
2.1.1.5 Calling Line Identification (CLI) Distribution
DDI / DID / TIE / MSN
For each trunk to which DDI/DID distribution is set, or for each trunk whose
is Private (TIE), modification parameters for DDI/DID number and TIE line call numbers can be programmed.
The Site, Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Card Type
Indicates the trunk card type (reference only).
Value Range
Card type
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
Trunk Property
Indicates the networking type of each trunk (reference only).
Value Range
Public, Private(TIE), VPN
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Trunk Property on this screen
PC Programming Manual 817