Table of Contents
Advertisement
WIT-300H Installation Manual
Issue: 0.1C
and copied to the flash memory.
TFTP transaction is completed.
After finishing the TFTP, WIT-300H phone is on rebooting with the new image.
Any error happens, this screen is shown. When any error occurs, the WIT-300H will work
abnormally. Hence, please try to download the image again, until you succeed.
5.
Console Connection
A. Console connection
(1) Plug in a console cable to WIT-300H and prepare for console monitoring by the PC through
terminal emulator. Setting parameter is 115200 baudrate, no flow control, 1 stop bit, no parity.
B. Console command
(1) ping - To make sure that you can access TFTP server from WIT-300H. It is can be done by
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
24
Date:: 30/Jan/05
Advertisement
Table of Contents
