Speaker Setting - Pioneer VSX-D814 Operating Instructions Manual

Setting up the receiver
Surround right speaker distance
setting (page 46)
Specify the distance from your listening
position to your surround right speaker.
Surround back speaker distance
setting (page 46)
Specifies the distance from your listening
position to your surround back speakers.
Surround left speaker distance setting
(page 46)
Specify the distance from your listening
position to your surround left speaker.
Subwoofer distance setting (page 46)
Specify the distance from your listening
position to your subwoofer.
Dynamic range control setting
(page 47)
Compress the dynamic range of the
sound track.
Dual mono setting (page 47)
Isolate one channel when listening to
discs with dual mono encoding.
Component video input settings
(page 47)
Specify the components to be assigned to
the component video inputs (below).
• Component video 1 input setting
• Component video 2 input setting
Digital input settings (page 47)
Specify the components to be assigned to
the digital inputs (below).
• Coaxial digital input 1 setting
• Coaxial digital input 2 setting
• Optical digital input 1 setting
• Optical digital input 2 setting
SR+ control settings (page 48)
Specify how you want to control your
Pioneer plasma display.
• Control mode setting
• Volume control setting
Function setting for DVD input
•
Function setting for TV input
•
Function setting for DVR input
•
Function setting for VIDEO input
•
3 Use or to adjust the setting.
The setting is entered automatically.
4 Repeat steps 2 and 3 to adjust other
setup options.
5 When you're done, press ENTER to
exit.
• The setting display is automatically exited
after 3 minutes of inactivity.

Speaker setting

• Default setting: FL-CS-SS (If a subwoofer
is detected when you turn the receiver on,
the default is FS-CS-SS.)
You must let the receiver know how many
speakers you have, and how big they are. The
size you choose (large or small) determines
how much bass is sent from the receiver to
the speakers.
In the display, F, C, and S refer to front, center,
and surround speakers respectively. Speaker
size is denoted as L for large speakers, S for
small speakers, and
is connected.
• If the cone size (diameter) of the speaker
is larger than 5 inches, set the speaker
size to L.
• If you're not using a subwoofer, we recom-
mend setting the front speakers to L.
(asterisk) if no speaker
07
43
En