Advertisement
Installing the disk in a 3.5-inch bay
Use the screws (inch screws) provided to install the drive.
Installing the disk in a 5-inch bay
Use the brackets and screws (inch screws) provided to
install the drive. (Refer to the diagram below.)
When bracket attached
8 Mounting and connecting the hard disk drive
1. Take off the front panel of the personal computer.
The assembly diagram shown below is intended as an
example. The actual connection locations may differ
depending on the model of computer used.
Press the metal release fittings
(both sides at the same time).
2. Remove the brackets of the expansion bay.
The assembly diagram shown below is intended as an
example. The actual connection locations may differ
depending on the model computer used.
Remove the brackets above and below.
12
Front Panel
After removing
Advertisement
