Advertisement
Activating P2 Streaming Server Software
You must activate registration prior to start using P2SS software. Please follow below steps:
1. Connect P2SS hardware to the Internet.
2. Run PActivationManager.exe from Activation folder on
desktop.
3. When you start the activation program for the first time,
a screen for registration appears, Enter the Information
in each item, and than click Apply button.
4. Window of the activation program is displayed.
5. Select the Model No SK001 column, and than click the
Activation button.
6. The key code input screen appears, Enter the P2SS
Activation key code that is supplied with the hardware in
the key code input field.
7. Click OK, Software is now activated.
Note: After carefully reading and agreeing with the Software License
Agreement, activate the Software according to the procedure described in the
Software License Agreement. If you activate the Software, you are considered
to have agreed with the terms of the Software License Agreement.
Network Requirements
P2 Camera
AJ-PX270, AJ-PX5000,
AJ-PX380, AJ-PX800,
AJ-PG50
PTZ Camera
AW-HE130, AW-
UE70, AW-HE40
Routing Requirements:
1. When using P2Cast to enable stream from P2 Camera, P2SS must be connected to Global IP Network. P2SS uses
following local UDP ports when streaming:
local ports: UDP: 50000-50006, 50020-50026, 50040-50046 & 50060-50066
2. P2SS requires access for STUN Server:
•
Ensure P2SS can access 104.45.140.135 and 104.45.9.228 IP address.
•
Ensure P2SS can access UDP port 3478 & 3479
Simple Port Tester
correctly. For more information on the Simple Port Tester, Please visit
4G/LTE
Wireless LAN
AJ-WM50
Wired LAN
Wired LAN
, Application shortcut available on desktop can help test if above mentioned ports are open
Internet
or
Local Network
http://www.pcwintech.com/simple-port-tester
VGA
Advertisement
