Panasonic KX-NS1000 Pc Programming Manual page 365

Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Networking Data Transfer
Enables transmission of extension status data to connected PBXs in a network. This setting is only available
when Port Type on this screen has been set to QSIG-Slave or QSIG-Master.
A maximum of two ports of each BRI card can be assigned to transmit extension status information.
Value Range
Off, On
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
PC Programming Manual References
Feature Guide References
4.3.5.1 Network Direct Station Selection (NDSS)
ISDN Extension
Parameters for ISDN Extension are not applicable for BRI ports assigned as CO ports.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Port Type
Selects the port type.
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on another
PBX. ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Feature Guide References
5.2.5.1 ISDN Extension
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
PC Programming Manual 365