Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
CNG Signal Fixation Detection Pattern
Specifies the CNG signal pattern to be detected before the PBX proceeds the fax operation.
Value Range
OFF, ON
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
CED Signal Fixation Detection Time
Specifies the minimum length of time required for the CED (called station identification) signal to be detected
by the PBX.
Value Range
50 ´ n (n=1–100) ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level (Network to PBX) A-Law
Specifies the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711A.
Value Range
-13–2 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level (Network to PBX) Mu-Law
Specifies the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711Mu.
Value Range
-7–8 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
PC Programming Manual
207