Bosch DCN Installation And User Instructions Manual page 50

DCN Wireless | Installation and User Instructions | Central Devices
10.6.8 Setup
Use the 4 Setup menu item to open the Setup
sub-menu. You can use the menu items in this
sub-menu to configure the central control unit and the
system (refer to table 10.25 and table 10.26).
table 10.25: Setup sub-menu (* = default)
Menu item
4A Wireless Mode
4B Loudspkr
4C Mic. Mode
4D Level
4E Routing I/O 2
4F Att. Tones
4G Mic. Priority
4H Request LED
Bosch Security Systems | 2007-11 | 9922 141 70691 en
Parameter
---
---
Mode:
Open*
Override
PTT
Signal:
Input 1
Input 2
Output 1
Output 2
---
Event:
Priority
Voting
---
LED setting
Value
On*
Sleep
Off
Subscription
---
NOM:
1, 2*, 3
1, 2*, 3
1, 2*, 3
Level:
-6 to 6 dB (0 dB*)
-6 to 6 dB (0 dB*)
-24 to 6 dB (0 dB*)
-24 to 6 dB (0 dB*)
Mode:
Recorder*
Equalized PA
Mix-minus
Insertion
Chime:
Off, 1*, 2, 3
Off*, 1, 2, 3
Temporarily off*
Permanently off
Flashing*, Continuous
en | 50
Description
Sets the mode of the
wireless network (refer to
12.3).
Gives access to the
Loudspkr sub-menu (refer
to 10.6.9).
The microphone mode of
the DCN and the
maximum number of
activated delegate
microphones (refer to
12.4).
The nominal levels of the
audio inputs and the audio
outputs of the central
control unit.
The audio routing mode of
the central control unit
(refer to 12.6).
The attention chimes of
the system (refer to 12.7).
The action taken by the
system when the
chairman releases the
priority button (refer to
12.8).
Sets the behaviour of the
request LED for the first
delegate in the request
list.