Panasonic KX-NCP500 Pc Programming Manual page 283

Feature Manual References
None
Flash—Flash Signal Detection (TIE)
Enables the PBX to detect a hookswitch flash signal sent from a TIE line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Flash—Minimum BREAK Width (TIE)
Specifies the minimum length of the break signal in a flash signal sent from a TIE line.
Default
200 ms
Value Range
8 ´ n (n=3–63) ms
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Flash—Flash Width (TIE)
Specifies the maximum length of a flash signal received from a TIE line that the PBX can recognize as a
hookswitch flash signal.
Document Version 2009-12
3.33 [1-1] Slot—Card Property - T1 type
PC Programming Manual 283