Pulse Dial—Maximum BREAK Width
Specifies the maximum length of the break signal in a pulse dial.
Default
112 ms
Value Range
8 ´ n (n=9–20) ms
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Pulse Dial—Minimum MAKE Width
Specifies the minimum length of the make signal in a pulse dial.
Default
8 ms
Value Range
8 ´ n (n=1–5) ms
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Flash—Flash Signal Detection (OPX)
Enables the PBX to detect hookswitch flash signals from an SLT connected to an OPX.
Default
Enable
Value Range
Disable, Enable
Document Version 2009-12
3.33 [1-1] Slot—Card Property - T1 type
PC Programming Manual
281