Glossary - GE RX3i PROFINET User Manual

Pac systems
Hide thumbs Also See for RX3i PROFINET:
Table of Contents

Advertisement

Chapter 1. Introduction

Glossary

1.8
AR
Application Relationship. PROFINET term for a relationship that is established between an IO-Controller/
IO-Supervisor and IO-Device. For any data to be exchanged between an IO-Controller/IO-Supervisor and a
given IO-Device, an Application Relationship must be established. Within the Application Relationship,
various Communication Relationships (CRs) are then established for the different types of data to be
exchanged.
Broadcast
In Ethernet, the transmission of a network message to all hosts on the network.
CPU Node
In a PACSystems RX3i PROFINET network, a CPU Node is a node in which a PACSystems RX3i CPU is
connected to the PROFINET network.
CR
Communication Relationship. PROFINET term for a channel that is established within an Application
Relationship (AR) to transfer specific data between an IO-Controller/IO-Supervisor and a given IO-Device.
Multiple CRs are established within an AR to transfer data.
DAP
Device Access Point. This access point is used to address an IO-Device as an entity.
Gratuitous ARPs
An Address Resolution Protocol (ARP) request sent by the host to resolve its own IP Address.
GSDML
General Station Description Markup Language - definition of PROFINET Device Characteristics.
IOC
PROFINET IO-Controller
IOD
PROFINET IO-Device
IOCR
Input Output Communication Relationship – describes the type (input/output) and amount of I/O data to be
transferred, the sequence of the transfers and the transfer cycle between a PROFINET IO-Controller (or
IO-Supervisor) and a PROFINET IO-Device.
IOCS
PROFINET Input/Output Consumer Status is transmitted on the PROFINET network to provide feedback on
Input Data for an IO-controller and Output Data for an IO-device.
IOPS
PROFINET Input/Output Provider Status is transmitted on the PROFINET network to provide feedback on
Output Data for an IO-controller and the Input Data for an IO-device.
IOxS
PROFINET abbreviation for the IOCS and/or IOPS (see above).
LLDP
Link Layer Discovery Protocol. IEEE standardized protocol used by network devices to advertise their
identity and capabilities.
LLDPDU
Link Layer Discovery Protocol Data Unit.
MAC
Media Access Control address (MAC address)
MAU
Medium Attachment Unit
MIB
Management Information Basis
MRC
Media Redundancy Client. Within Media Redundancy Protocol, an MRC is responsible for helping the MRM
detect breaks/no breaks in the ring.
MRM
Media Redundancy Manager. Within Media Redundancy Protocol, an MRM is responsible for ensuring that
the ring does not have a closed loop, while simultaneously ensuring maximal connectivity between nodes
on the ring.
MRP
Media Redundancy Protocol. An Ethernet protocol that provides redundant paths for PROFINET-IO cyclic
traffic by supporting a ring topology.
Multicast
In Ethernet, the transmission of a network message to all hosts within a host group.
NOS
Name of Station
OID
Object Identifier
Phase
If the IOCR Update Period is greater than the Send Clock time, the Update Period is divided into multiple
phases where each phase is equal to one Send Clock.
16
PACSystems* RX3i PROFINET IO-Scanner User Manual
GFK-2737F

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gfk-2737f

Table of Contents