RT430/434
Log Files
Reboot System
62
as time reference. In demo mode, the Locked Led will remain alight and the dry
contact relay opened. When the Demo Mode is activated, it is possible to configure
the date and time manually, in Time Settings tab from equipment Web Interface.
All time protocols work in Demo Mode: PTP, NTP, SNTP, IRIG-B and all other low
frequency signals.
Figure 39: Manual Time setting – only available in Demo Mode
Technical support may request log files in case maintenance is required.
This feature reboots the system without the need to withdraw the power supply.
Chapter 6 – Configuration
RT430/434