Functional Overview; Standards Compliance; Figure 1: Functional Overview Of Rt430/434 - GE Reason RT430 Technical Manual

Chapter 1 – Introduction
5

Functional Overview

6

Standards Compliance

RT430/434

Figure 1: Functional Overview of RT430/434

The device has undergone a range of extensive testing and certification processes to
ensure and prove compatibility with all target markets. A detailed description of
these criteria can be found in the Technical Specifications chapter.
Compliance with the European Commission Directive on EMC and LVD is
demonstrated using a Technical File.

EMC Compliance: Compliance with IEC 60255-26:2013 was used to establish
conformity.

Product Safety: Compliance with IEC 61010-1:2010 was used to establish
conformity.

Protective Class: Protective Class I. This equipment requires a protective
conductor (ground) to ensure user safety.

Installation category: Compliance with IEC 61010-1:2010 Overvoltage Category
II

Environment: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-14,
IEC 60255-21-1, IEC 60255-21-2. The equipment is intended for indoor use only.
If it is required for use in an outdoor environment, it must be mounted in a
specific cabinet or housing which will enable it to meet the requirements of
IEC 60529 with the classification of degree of protection IP54.

R&TTE Compliance: Radio and Telecommunications Terminal Equipment (R&TTE)
directive 99/5/EC. Conformity is demonstrated by compliance to both the EMC
directive and the Low Voltage directive, to zero volts.
RT430/434
17