Starting Ca Server; Installing Ca Server - Panasonic KX-NCP Series Software Manual

4.1 Installing CA Server

4 Starting CA Server

4.1 Installing CA Server
1.
Double-click "Setup.exe", and follow the on-screen guidance to install CA Server.
Note
You can choose to install CA Server in "Windows service mode", or in "executable mode". If you
choose "Windows service mode", CA Server will launch automatically each time the computer is
started. If you choose "executable mode", you must manually launch CA Server from the Start menu
each time the computer is started.
2.
When installation is complete, CA Server starts, and the setup screen is displayed:
Set your language, dialling codes for your country/area, port numbers to be used by CA Server and by CA
Web Manager, enter and verify the Administrator password, and click OK. You must enter a country/area
code to proceed.
3.
The PBX settings screen is displayed:
Choose a USB or LAN connection to the PBX. If using a LAN connection, specify the IP address and port
number of the PBX on your network and click OK.
12 Quick Reference Guide