March 2008
Setting the Backlight
Timer
2-6
The MMS-3 has a backlight timer which is provided with battery-
powered units to preserve battery power and prolong the life of the
LCD.
[PROG]
Press the
key to enter the user program.
Enter Passcode: XXXX
Note: If you have already entered the user program, refer to the
menu maps at the end of Chapter 3 to navigate to the
Backlight Menu.
Programming Menu
[BACKLIGHT]
Backlight On Time
00:05
(HH:MM)
You may now do one of the following:
•
Refer to another section and perform a different procedure. Refer
to the menu maps at the end of Chapter 3 to navigate through the
user program.
•
[RUN]
Exit by pressing the
Enter the passcode
1
Use the arrow keys to move the
brackets to BACKLIGHT and
[YES]
press
.
1
Enter the desired time interval
[YES].
and press
If you do not
want to use the backlight, enter 0
(zero).
key.
Basic Programming
.