Utility-Sd Card File Delete; Utility-Message File Transfer Pc To Pbx - Panasonic KX-TDA50 Programming Manual

•
• To update all matching cards simultaneously:
•
These cards are displayed:
• All matching LPR cards currently in OUS status (KX-TDA100/KX-TDA200/KX-TDA600 only)
• All matching CSIF cards currently in INS status.
When one is selected, all related CS ports currently in OUS status are displayed in the drop-
down list directly below.
5.
Click View to update the displayed header information of the selected files.
The file with the higher File Version and File Revision numbers is newer.
6.
Click Load to update the file stored on the PBX.
When the update is finished, a message will be displayed.
7.
Click OK.
The display will return to the Detail screen.
2.5.5 Utility—SD Card File Delete
Allows you to delete files from the SD memory card.
This option is only available at Installer level.
The following essential system files cannot be deleted by this utility:
KX-TDA50: PSMPR, DSSYS, DSKEYSD
KX-TDA100/KX-TDA200: PMPR, DSYS, DKEYSD
KX-TDA600: PLMPR, DLSYS, DLKEYSD
To delete files from the SD memory card
1.
From the Utility menu, select SD Card File Delete.
2.
Click on the file to be deleted.
3.
Click Delete.
A confirmation screen will be displayed.
4.
Click OK.
The display will return to the SD Card File Delete screen.
2.5.6 Utility—Message File Transfer PC to PBX
Transfers Outgoing Message (OGM) files from the PC to the selected MSG card.
This option is only available at Installer level, and requires that at least 1 MSG card is installed. For
the KX-TDA100/KX-TDA200/KX-TDA600, the OPB card that it is mounted on must be set to OUS
status. For the KX-TDA50, the MSG card must be set to OUS status.
Files are stored on the MSG card in the location specified by the file's header information. Uploaded
files are automatically renamed as necessary. If this location already contains an OGM, it will be
overwritten by the newly uploaded message.
CSs: select the slot number and card name, and then select the related CS port from
the drop-down list directly below.
Select "ALL".
2.5 Utility
PC Programming Manual 55