Tool-Simplified Voice Message-Delete All Recordings (Kx-Tda50 Only); Tool-Simplified Voice Message-Check Current Usage (Kx-Tda50 Only) - Panasonic KX-TDA50 Programming Manual

2.4 Tool
Note
When upgrading from a system without an MEC card installed to a system with an MEC card
installed, after converting the system data using this utility, it is necessary to pre-install the MEC
card by setting Memory Expansion Card: on the 2.7.3 [1-1] Slot—MPR Card Property screen
to PreInstall.
To convert system data
1.
From the Tool menu, select System data Convert.
2.
In Source File Name, enter the file to convert.
• Enter the path and name of the file in the text field.
• Click the "..." button to navigate to and select the target file.
3.
In Destination File Name, enter the desired name for the converted file.
The destination file name or location must be different from the source file name.
If another file with the same name already exists in that location, it will be automatically
overwritten.
• Enter the path and name of the file in the text field.
If you do not specify a path, the new file will be saved in the same directory as the source file.
• Click the "..." button to navigate to and select the target file.
4.
Click OK.
If the convert operation was successful, a message will be displayed.
5.
Click OK.
2.4.9 Tool—Simplified Voice Message—Delete All Recordings
(KX-TDA50 only)
Deletes all voice messages recorded to SVM cards installed in the PBX.
To delete voice messages
1.
From the Tool menu, point to Simplified Voice Message and select Delete All Recordings.
2.
Select the card from which to delete messages.
3.
Click OK.
2.4.10 Tool—Simplified Voice Message—Check Current Usage
(KX-TDA50 only)
Displays information on the voice messages stored in SVM cards installed in the PBX. For each
message, the type of message and the associated extension are displayed.
To view SVM message status
• From the Tool menu, point to Simplified Voice Message and select Check Current Usage.
42 PC Programming Manual