Before Recording (Deck 2 Only) - Panasonic SC-AK62 Operating Instructions Manual

Panasonic operating instructions cd stereo system sc-ak77, sc-ak66, sc-ak62
Table of Contents

Advertisement

A
B
To protect tapes against further recording
Side A
Tab for side "B"
To re-record
Normal position tape
C
22
RQT5769
Tab for side "A"
SC-AK77
only
Hi-position tape
Detection hole
1
3
2
4
Listening to tapes
To fast-forward or rewind the tape
A
Press [g/(] or [)/f] in the stop mode.
SC-AK77
Tape direction
To rewind
" 3"
[g/(]
"4"
[)/f]
SC-AK66
SC-AK62
SC-AK33
To rewind
[g/(]
To find the beginning of a program
A
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.
Press [g/(] or [)/f] during play.
Note
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.

Before recording (Deck 2 only)

Types of tapes which can be recorded correctly
SC-AK77
Use normal and high position tapes.
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
The unit automatically identifies the type of tape.
SC-AK66
SC-AK62
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Erasure prevention
B
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
How volume, sound quality/field and surround
affect recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field and surround system.
In recording, sound quality/field and surround system are set auto-
matically to "FLAT".
To erase a recorded sound
C
1. Press [TAPE, DECK 1/2].
2. Insert the recorded tape into deck 2.
3.
only
SC-AK77
Press [REV MODE] to select reverse mode.
4. Press [a REC/STOP].
Notes
You cannot record when [6CH INPUT] is selected.
You cannot open deck 1 while recording.
You cannot fast-forward or rewind one deck while recording with
the other.
To fast-forward
[)/f]
[g/(]
To fast-forward
[)/f]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents