GE 745 Instruction Manual page 90

ADVANCED ENERVISTA 745 SETUP FEATURES
4.6.5 Modbus User Map
4–36
 With EnerVista 745 Setup running and communications established,
select the Actual > Event Recorder item from the main menu.
This displays the Event Recorder window indicating the list of recorded
events, with the most current event displayed first.
To view detailed information for a given event and the system information at the moment
of the event occurrence,
 Change the event number on the Select Events box.
The EnerVista 745 Setup software provides a means to program the 745 user map
(Modbus addresses 0180h to 01F7h). Refer to GE publication GEK-106636B: 745
Communications Guide for additional information on the user map.
 Select a connected device in EnerVista 745 Setup.
 Select the Setpoint > User Map menu item to open the following
window.
Figure 4-3: Event recorder window
745 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 4: INTERFACES