Miele CVA 2650 Technical Information page 85

CVA 265x & CVA 266x
Function
Program index
Fault
1
memory
Component test
Option/Component Activated
ID no. 1:
ID no. 2:
Page 1
Page 2
2
Ceramic valve
2
Capsule transport
2
Capsule magazine
2
Brew unit
Coffee/hot-water pump
Steam pump
85
Technical Information
Faults 1 - 6
Faults 7 - 12
Initialize
Step counterclockwise
Step clockwise
Rest position
Coffee position
Water position
Cont. counterclockwise
Continuous clockwise
Initialize
Carry out
Service position
Continuous operation
Initialize
Step counterclockwise
Step clockwise
Chamber 1 to 5
Cont. counterclockwise
Continuous clockwise
Initialize
Rest position
Eject position
Press position
Service position
Continuous upwards
Continuous downwards
Release
Brew unit
Cappuccinatore
Release
Cappuccinatore
Description
ID no. of display and EPWZ 850
control electronic
ID no. of EPL 850 power
electronic
The last 12 fault codes
registered are shown.
The last fault code is marked
with L. If a fault is registered
more than once, its code will be
shown the appropriate number
of times unless the faults
occurred immediately after each
other.
See Table 060-2 for fault code
descriptions.
Valve reference and
valve position sensors display 0
and 1 alternately.
Slide sensor reading:
0 = Capsule transport lever in
intermediate setting
1 = Capsule transport lever in
basic setting
Capsule magazine check
(Table 060-9)
To reach the lowered end
position, the capsule plate must
be removed from the brew unit
beforehand.
The press position can only be
reached with the capsule plate
installed.
(See also Table 060-10.)
The display shows the number
of pulses registered by the flow
meter. See Table 060-11.
Steam pump check