Download Print this page
HP StorageWorks MSA1510i Installation Overview
HP StorageWorks MSA1510i Installation Overview

HP StorageWorks MSA1510i Installation Overview

Advertisement

Quick Links

HP StorageWorks
Modular Smart Array 1510i

Installation overview

© Copyright – 2005 Hewlett-Packard Development Company, L.P.
First Edition, May 2005
Product names mentioned herein may be trademarks of their respective companies.
Microsoft® and Windows® are US. registered trademarks of Microsoft Corporation.
Information in this document is subject to change without notice.
Printed in the US.
www.hp.com
*383069-001*
*383069-001*
Important:
This document provides a brief overview of the
information described in the HP StorageWorks
MSA1510i installation guide, also shipped with

the device.

For detailed installation and configuration
instructions, see the installation guide.
MSA1510i best practices
Frequently visit the MSA1510i web site:
http://h18006.www.1.hp.com/products/storageworks/msa1510i
This site is updated to include the latest information about your MSA,
including the latest hardware-firmware-software compatibility
information, controller firmware, iSCSI initiator and MPIO software,
and system documentation.
Sign up with Subscriber's Choice, to receive notifications and alerts
about the MSA1510i and other HP devices:
http://www.hp.com/go/e-updates
Review the latest MSA1510i compatibility guide before installing or
updating a software or driver component on your server, to ensure
that the updated configuration is supported. This guide is available
on the MSA1510i web site.
Frequently review the messages on the MSA1510i controller LCD
panel, to monitor the status of your MSA1510i.
If more than one server will access the MSA1510i:
- Set up VLANs to control initiator access to the targets.
- Enable mutual initiator and target iSCSI CHAP authentication.
- Create Access Control Lists (ACL), to control access at the LUN level.
Read the HP SAN design guide, to help you design a plan for your
MSA1510i and iSCSI network. This guide contains useful information
about setting up and managing a SAN or Network and is available
on the HP SAN Infrastructure web site:
Change the access permissions for the Storage Management Utility
(SMU) from the defaults to strong user-defined values, as soon as
possible.
.
http://www.hp.com/go/san
1 1 1 1 1 Get ready
Before installing your MSA1510i:
Determine if this poster contains enough detail for you to install your MSA.
If you need more detail, use the MSA1510i installation guide.
Use the following worksheet to record information about your MSA1510i
iSCSI storage network. Information in this worksheet is used for initial setup
and configuration, and for future configuration changes and troubleshooting.

Configuration worksheet

This worksheet lists items required to install an MSA1510i, and includes spaces
for an additional server, Ethernet switch, and redundant MSA components.
My configuration
___ Singlepath, non-clustered servers
___ Multipath, non-clustered servers
Management network
Network ID/IP address
Subnet mask
Gateway
VLAN ID
Name server
iSCSI network
Network ID/IP Address
Subnet mask
Gateway
VLAN ID
Server
Server model /server name
Operating system version/service pack ______________ /_______________
iSCSI qualified name
iSNS server IP Address
VLAN ID
100/1000BaseT Ethernet NIC model _______________________________
NIC slot number/port number
Additional Ethernet NIC model
Additional NIC slot number/port number_____________ /_______________
Additional server
Server model /server name
Operating system version/service pack ______________ /_______________
iSCSI qualified name
iSNS server IP Address
VLAN ID
100/1000BaseT Ethernet NIC model _______________________________
NIC slot number/port number
Additional Ethernet NIC model
Additional NIC slot number/port number_____________ /_______________
Ethernet network switch
Switch model
VLAN ID
Additional or redundant Ethernet network switch
Switch model
VLAN ID
MSA1510i
Controller firmware version
Management port (MA0) IP address
Management port subnet mask
Storage port (SA0, SA1) IP address
Storage port subnet mask
Storage Management Utility access
Redundant MSA1510i controller (for multipathing)
Redundant MSA1510i 2-Port Ethernet iSCSI module (for multipathing)
Storage Enclosures
Quantity
Category 5e (or better) Ethernet cables
SCSI cables
___ Singlepath, clustered servers
___ Multipath, clustered servers
______________ /_______________
_______________________________
_______________________________
_______________________________
_______________________________
______________ /_______________
_______________________________
_______________________________
_______________________________
______________ /_______________
_______________________________
_______________________________
_______________________________
______________ /_______________
_______________________________
______________ /_______________
_______________________________
_______________________________
_______________________________
______________ /_______________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
______________ /_______________
_______
____
MSA20: _______ MSA30: _______

Advertisement

loading

Summary of Contents for HP StorageWorks MSA1510i

  • Page 1: Installation Overview

    - Enable mutual initiator and target iSCSI CHAP authentication. - Create Access Control Lists (ACL), to control access at the LUN level. Storage Enclosures Read the HP SAN design guide, to help you design a plan for your Quantity MSA20: _______ MSA30: _______ MSA1510i and iSCSI network.
  • Page 2: Network Best Practices

    NOTE: The iSCSI initiator and MPIO software components are available on the MSA1510i web round-hole pins. site and the MSA1510i installation software CD shipped with the MSA. To ensure that you are using the most recent versions, HP recommends obtaining these components from the MSA1510i 3. Rack the device. web site, if possible.
  • Page 3: Connect The Cables

    SATA SCSI SCSI SCSI SCSI MSA1510i: http://h18006.www.1.hp.com/products/storageworks/msa1510i 15245 15246 This site includes important information about your MSA, and is updated to 15244 include the latest specification and compatibility information, controller firmware, iSCSI initiator, MPIO multipathing software, release notes, and user documentation.
  • Page 4 NOTE: NOTE: The following instructions detail using the SMU Initial System Configuration Wizard. For information about the SMU, see the HP Storage Management Utility user guide. For information about the Command Line Interface, see the HP StorageWorks MSA1510i Command Line Interface reference guide.